Test No. 7: Cruise Control Cannot Be Set
- Check if scan tool can communicate with cruise control system. If communication is not possible, go to TEST NO. 2 (SCAN TOOL COMMUNICATION WITH CRUISE CONTROL ECU NOT POSSIBLE)
. If communication is possible, go to next step.
- Check if DTC 11, 12, 14, 15, 16 or 17 is present. If code(s) are present, diagnose affected circuit. See appropriate test under DIAGNOSTIC TESTS
. If code(s) are not present, go to next step.
- Using scan tool, check data list reference function. Turn ignition switch to ON position and press cruise control MAIN switch. Check data list reference items No. 05 and 14. See Fig 1
. If input switch inspection is possible, and data list items No. 05 or 14 are present, go to next step. If code(s) are not present, replace cruise control ECU.
- If data list item No. 05 (brakelight switch) is present, go to TEST NO. 3 (CRUISE CONTROL DOES NOT CANCEL WHEN BRAKE PEDAL IS DEPRESSED)
. If data list item No. 14 (clutch pedal position switch or P/N switch circuit) is present, go to TEST NO. 4 (CRUISE CONTROL DOES NOT CANCEL WHEN CLUTCH IS DEPRESSED)
or TEST NO. 5 (CRUISE CONTROL DOES NOT CANCEL WHEN TRANSAXLE IS SHIFTED TO "N" RANGE)
.
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.