DTC Set Criteria
- Engine is in closed loop idle speed control. Code will set when idle speed is more than target idle speed by 300 RPM or more for 10 seconds.
- Engine is in closed loop idle speed control. During previous operation, maximum ambient temperature was less than 113°F (45°C). Engine coolant temperature is more than 176°F (80°C). Battery voltage is more than 10 volts. Intake air temperature is more than 14°F (-10°C). Atmospheric pressure is more than 11 psi (76 kPa). Code will set when idle speed is more than target idle speed by more than 200 RPM for 10 seconds.
- Engine is in closed loop idle speed control. Power steering switch is off. Volumetric efficiency is less than 40 percent. Intake air temperature is more than 14°F (-10°C). Atmospheric pressure is more than 11 psi (76 kPa). Code will set when idle speed is more than target idle speed by more than 100 RPM for 10 seconds.