LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2000 >> Diamante ES >> Repair and Diagnosis >> Body & Frame >> Memory Power Seats >> Description & Operation

Description & Operation

NOTE: This article also contains passenger's power seat information.

Power seat system consists of reversible motors, a control switch assembly and a wiring harness. Circuit is protected by fusible links, located in main relay box in engine compartment. Both driver's and front passenger's seat offer power adjustments.

Power assist adjustments offered are: forward and backward movement, height adjustment, and separately adjusted front or rear seat tilt. Controls switches are located on side of seat cushion.

Vehicle is equipped with a 2-position power memory feature. Power memory seat control panel is located on driver-side door. Once seat is adjusted to desired position, memory of seat position is retained by pressing "M" button and then pressing button 1 or 2 within 5 seconds. To adjust seat, press either 1 or 2 to achieve desired seat position. If incorrect memory button is pressed, operation can be canceled by pressing STOP button.

Memory power seat is also controlled by the multiplex control system which uses the Electronic Time Alarm Control System (ETACS) ECU, assist-ECU and memory power seat ECU to process signal data to control on/off operation of electrical loads. Multiplex control system also helps diagnose body control related communication problems by outputting Diagnostic Trouble Codes (DTCs).