LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 2000 >> Diamante ES >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> Multiplex Control Systems >> Self-Diagnostic System >> Retrieving Diagnostic Trouble Codes (DTC) >> Using Scan Tool

Using Scan Tool

Connect scan tool to Data Link Connector (DLC) and check DTCs. If DTC is present, diagnose fault. See appropriate test under DIAGNOSTIC TESTS  .

NOTE: If ignition switch is turned on with scan tool connected to DLC, some warning lights will flash. This is normal because DLC terminal No. 1 is being grounded causing warning light to output DTCs. For accessing switch diagnostic mode and specification confirmation mode, see scan tool manufacturer's instructions.