LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1999 >> 3000GT Base, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Trouble Shooting >> Cruise Control Switch Function Test

Cruise Control Switch Function Test

NOTE: Speed will not set beyond cruise control system speed limit of 124 MPH.
NOTE: If vehicle speed decreases about 9 MPH below set speed, set speed will be cancelled.
  1. Cruise control switch is part of multifunction switch mounted on steering column. To operate cruise control system, turn cruise control main switch to ON position. Ensure ASC ON indicator light on instrument cluster comes on.
  2. Drive vehicle to about 25 MPH or greater. Pull down on cruise control switch to SET position and release. Vehicle speed should stay at set speed. Instrument cluster CRUISE indicator light should illuminate. To increase set speed, push cruise control switch up to RESUME position and hold until new set speed is reached.
  3. To lower set speed, pull down on cruise control switch to COAST position and hold until new set speed is reached. To return to set speed after cancellation, move switch up to RESUME position. Vehicle speed should return to previous setting before cancellation. Set speed should cancel when any of the following occurs:
    • Brake pedal is depressed.
    • Clutch pedal is depressed.
    • Cruise control cancel switch is activated.
    • Cruise control main switch is turned to OFF position.
    • Transmission is shifted to Neutral.