LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1996 >> Galant ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 76 (Engine Controls - System/Component Tests - 3.0L) >> Computerized Engine Controls >> Control Unit >> Power Circuits

Power Circuits

WARNING: This page is about a different car, the 1995 Mitsubishi Montero, 1995 Mitsubishi Diamante, 1995 Mitsubishi 3000GT, and 1995 Dodge Stealth. However, it is still accessible from the selected car via links, so may be relevant.

Turn ignition on. Check for battery voltage on PCM power terminals. See POWER TERMINAL IDENTIFICATION  table. If battery voltage is not present, check operation of MFI relay. See RELAYS  under MOTORS, RELAYS & SOLENOIDS.

NOTE: California and Federal applies to installed emissions equipment, which may be verified by underhood Emission Control label. California emissions may be available in other states.
Fig 1: Identifying PCM Connectors (Diamante (DOHC), Stealth (DOHC Calif. & DOHC Turbo-Fed.), & 3000GT (Calif. & Turbo-Fed.))
G95G31167Courtesy of MITSUBISHI MOTOR SALES OF AMERICA
Fig 2: Identifying PCM Connectors (Diamante (SOHC), Stealth (SOHC & DOHC Non-Turbo-Fed.) & 3000GT (Non-Turbo-Fed.))
G95H31168Courtesy of MITSUBISHI MOTOR SALES OF AMERICA
GROUND TERMINAL IDENTIFICATION

Application PCM Terminals No.
3.0L 13 & 26
POWER TERMINAL IDENTIFICATION

Application PCM Terminals No.
3.0L 12 & 25
POWERTRAIN CONTROL MODULE (PCM) LOCATION

Application Location
Stealth & 3000GT Behind Center Console
All Others Behind Right Side Of Instrument Panel (Glove Box)