LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1994 >> Galant ES >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Diagnostic Testing >> Code 34: Pedal Stroke Sensor & Pump System

Code 34: Pedal Stroke Sensor & Pump System

NOTE: Code 34 is output if a motor pump ON instruction has been given but output voltage of pedal stroke sensor does not change.
  1. Connect scan tester. Perform actuator test No. 5. Refer to tester instructions for actuator test procedure. Determine if hydraulic unit air bleeds during brake pedal operation. If air bleeding does not occur, replace hydraulic unit.
  2. If air bleeding occurs, inspect pedal stroke sensor adjustment and operation. See PEDAL STROKE SENSOR under REMOVAL & INSTALLATION. Adjust as needed. See PEDAL STROKE SENSOR under COMPONENT TESTING. Replace sensor as needed.
  3. Inspect all circuits between pedal stroke sensor and ABS ECU. See WIRING DIAGRAM. Repair circuit(s) as needed. If all circuits are okay, replace ECU and retest system.