LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1994 >> Eclipse Base, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Removal & Installation >> Electronic Control Unit (Ecu) >> Removal & Installation

Removal & Installation

  1. ECU is located behind right rear quarter panel trim. See Figure. Disconnect negative battery cable. Remove rear seat. Remove scuff plate. Remove quarter panel mounting screws and trim clip.
  2. Carefully remove quarter panel trim. Disconnect ECU wiring harness connector. Remove ECU mounting bolts/nuts and ECU. To install, reverse removal procedure.