Front Passenger's Seat
Disconnect each limit switch harness connector. Operate each switch to check continuity between terminals using ohmmeter. See LIMIT SWITCH CONTINUITY andFig 1 . Replace power seat adjuster assembly if any switch fails testing.
LIMIT SWITCH CONTINUITY
| Switch Position | Check Continuity Between | |
|---|---|---|
| Slide Limit Switch | ||
| Forward | Pins No. 1 & 2 | |
| Backward | Pins No. 1 & 3 | |
| Front & Rear Height Limit Switch | ||
| Up | Pins No. 1 & 3 | |
| Down | Pins No. 1 & 2 | |
| Reclining Limit Switch | ||
| Forward | Pins No. 1 & 3 | |
| Backward | Pins No. 1 & 2 | |
| All Limit Switches | ||
| Middle (ON) | Pins No. 1, 2 & 3 | |