LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1991 >> Eclipse Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Engine Controls - Basic Testing) >> Ignition Checks >> DISTRIBUTORLESS Ignition System (Dis) >> Ignition Coil Resistance (Eclipse 2.0L)

Ignition Coil Resistance (Eclipse 2.0L)

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1990 Mitsubishi Van, 1990 Mitsubishi Sigma, 1990 Mitsubishi Precis, 1990 Mitsubishi Pickup, and 1990 Mitsubishi Montero. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a DVOM, measure primary coil resistance between ignition coil connector terminals No. 2 and No. 4 (coils for cylinders No. 1 and No. 4) and between terminals No. 4 and No. 1 (coils for cylinders No. 2 and No. 3). See Fig 1 -Fig 2 .
  2. Measure secondary coil resistance between coil towers for cylinders No. 1 and No. 4 and between coil towers for cylinders No. 2 and No. 3. See Fig 3 . Primary and secondary coil resistance should be within specification. See DIS IGNITION COIL RESISTANCE  table.
    DIS IGNITION COIL RESISTANCE - Ohms @ 68°F (20°C)

    Application Primary Secondary
    All Models .77-.95 10.3-13.9
    Fig 1: All Models Except Eclipse 2.0L Testing Ignition Coil Primary Resistance (DIS Models)
    G90H15351Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 2: Eclipse 2.0L Testing Ignition Coil Primary Resistance (DIS Models)
    G90B15355Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    Fig 3: Testing Ignition Coil Secondary Resistance (DIS Models)
    G90I15360Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.