LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1991 >> 3000GT Base, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft Systems >> Component Testing >> Hood Switch

Hood Switch

NOTE:

For component location, refer to illustration. See Figure .

Remove hood switch. Connect ohmmeter to terminal No. 1 and 2, and check for continuity between the terminals. Continuity should exist. Push the switch plunger in, Continuity should not exist. See Fig 1 .

Fig 1: Testing Anti-Theft Alarm Hood Switch
G00159989Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.