How To Set The Reminder Schedule
- Move the electric motor switch to the OFF position.
- Operate the selection button to display WARNING PERIOD on the odometer.
- Press the selection button once for at least 1.2 seconds.
- The service reminder indicator will flash.
- Press the selection button three times for at least 1.2 seconds while the service reminder indicator is flashing.
- The service reminder indicator is turned ON, and the current schedule is displayed on the odometer.
- While the current schedule is displayed (for three seconds), press the selection button consecutively three times for less than 1.2 seconds.
- The odometer is shifted to the schedule selection mode.
- When the selection button is pressed for less than 1.2 seconds, the schedule is shifted, and when the button is pressed for 1.2 seconds or more, the displayed schedule is set.NOTE: Schedule, "JPN", "GCC", "EU" and "AUS" can also be selected. However, only the "NAS" setting will be accepted.
- The set schedule is displayed for 3 seconds, and the time until next warning period is displayed.