LEMON Manuals: Even more car manuals for everyone
Home >> Mitsubishi >> 1987 >> Starion ESI-R >> Repair and Diagnosis >> Maintenance >> Procedures >> Maintenance Reminder Light (Reset Procedures) >> Maintenance Service Reminder >> Maintenance Service Reminder Reset - Procedure 01 >> How To Set The Reminder Schedule

How To Set The Reminder Schedule

  1. Turn the ignition switch to the "OFF" position.
  2. Operate the multi-information meter button to display WARNING PERIOD on the odometer.
  3. Press the multi-information meter button once for at least 1.2 seconds.
  4. The service reminder indicator will flash.
  5. Press the multi-information meter button three times for at least 1.2 seconds while the service reminder indicator is flashing.
  6. The service reminder indicator is turned ON, and the current schedule is displayed on the odometer.
  7. While the current schedule is displayed (for three seconds), press the multi-information meter button consecutively three times for less than 1.2 seconds.
  8. The odometer is shifted to the schedule selection mode.
  9. When the multi-information meter button is pressed for less than 1.2 seconds, the schedule is shifted, and when the button is pressed for 1.2 seconds or more, the displayed schedule is set.
    NOTE: Schedule, "JPN", "EU", "NAS", "GCC/EXP", "MMAL" and "SEVERE" can also be selected. However, only the "Normal" setting will be accepted.
  10. The set schedule is displayed for 3 seconds, and the time until next warning period is displayed.