LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2014 >> Cooper S, 2D Convertible, Standard Trans >> Repair and Diagnosis >> General Information >> Reset Procedures >> ATEQ TPMS Reset Procedure >> ATEQ TPMS Reset Procedure >> Resetting TPM Without iDrive

Resetting TPM Without iDrive

  1. Set the tire pressure of all wheels to specification.
  2. Start engine.
  3. Move turn signal lever up or down until TPM warning symbol and RESET appears. See Fig 1.
  4. Press BC button on end of turn signal lever to confirm selection.
  5. Press and hold BC button for approximately 5 seconds until a CHECK/TICK appears after RESET.
  6. Drive vehicle. Initialization is automatically completed during the drive, without any feedback issued.
Fig 1: Locating TPMS Reset Button (Without iDrive)
G00458803Courtesy of BMW OF NORTH AMERICA, INC.