LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2002 >> Cougar 2.5 L, Standard >> Repair and Diagnosis >> Transmission >> Clutches >> Bleeding Hydraulic System

Bleeding Hydraulic System

WARNING: DO NOT let brake fluid get onto the skin or into the eyes. If brake fluid comes into contact with the skin or eyes, rinse the affected places immediately with water.
CAUTION: If brake fluid comes into contact with the paint work, it should be washed off immediately with water.
NOTE: Maintain absolute cleanliness when filling brake fluid. DO NOT reuse brake fluid.
  1. Fill the brake fluid reservoir with High Performance DOT 3 Motor Vehicle Brake Fluid (C6AZ-19542-AB). Fill a bleed jar half way with high performance DOT 3 motor vehicle brake fluid. Attach one end of a hose to the clutch bleed nipple. See Fig 1 .
  2. Place the other end in a bleed jar and open the clutch bleed nipple one turn. Depress the clutch pedal repeatedly until the emerging fluid is free of bubbles. Always make sure that there is sufficient brake fluid, at least 0.19" (5 mm) above the MAX line, in the reservoir.
  3. After bleeding, tighten the clutch bleed nipple to specification. See TORQUE SPECIFICATIONS  . Install clutch bleed nipple dust cap. Depress the clutch 10 times and check that it is functioning correctly.
  4. Check the brake fluid level. The fluid level should be between the MIN and MAX marks. If the brake fluid level drops below the MIN mark, the brake warning indicator will light up. As necessary, fill the brake fluid reservoir with brake fluid.
Fig 1: Identifying Clutch Bleed Nipple
G00186947Courtesy of FORD MOTOR CO.