LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2002 >> Cougar 2.5 L, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine - 2.5L >> Disassembly And Assembly Of Subassemblies >> Piston >> Disassembly

Disassembly And Assembly Of Subassemblies: Piston: Disassembly

    NOTE: Mark the pistons to make sure assembly with the original connecting rods and installation in the same cylinders from which they were removed.
  1. Remove the piston rings from the piston and discard.
    1. Remove the two compression rings.
    2. Remove the two oil control ring segments and the spacer.
      Fig 1: Removing Piston Rings
      G03419182Courtesy of FORD MOTOR CO.
  2. WARNING: The retaining ring has a tendency to spring out during removal. Cover the end of the pin bore with a hand or shop rag when removing the retaining ring. Eye protection should be worn. Failure to follow these instructions may result in personal injury.
    Fig 2: Removing Two Piston Pin Retaining Rings
    G03419183Courtesy of FORD MOTOR CO.
  3. Using the special tool, remove the two piston pin retaining rings.
  4. Push the piston pin from the piston and connecting rod.