Removal & Installation: Notes
CAUTION:
DO NOT place the tripod joint under tension. Never hold the axle shaft just by the tripod joint. Utmost care should be taken while removing/installing and disassembling/assembling the axle shafts. The following points should be observed:
- When removing axle shafts DO NOT pull on the tripod joints.
- Check polished surfaces and splines for damage.
- DO NOT allow the CV boots to come into contact with sharp edges, the engine when it is hot or the exhaust system.
- DO NOT drop the axle shafts, as this can cause interior damage to the CV boots which may not be visible from the outside.
- DO NOT use axle shafts as levering tools for the installation of other components. The axle shafts must always hang freely.
- The tripod joint can be damaged by hard impacts on the tripod joint housing.