LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 2002 >> Cougar 2.0 3 >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Control >> Removal And Installation >> Hydraulic Control Unit (HCU) - Vehicles With 2.5L Engine >> Installation

Hydraulic Control Unit (HCU) - Vehicles With 2.5L Engine: Installation

NOTE: After installation, bleed the brake system. For additional information, refer to BRAKE SYSTEM-GENERAL INFORMATION .
  1. To install, reverse the removal procedure.
    Fig 1: Installing Hydraulic Control Unit
    G03417776Courtesy of FORD MOTOR CO.
    Fig 2: Installing Hydraulic Control Unit Support Bracket Side Bolts
    G03417777Courtesy of FORD MOTOR CO.
    Fig 3: Installing Hydraulic Control Unit Support Bracket Rear Bolts
    G03417778Courtesy of FORD MOTOR CO.
    Fig 4: Connecting Hydraulic Unit Brake Tubes
    G03417779Courtesy of FORD MOTOR CO.
    Fig 5: Installing Brake Booster Support Brackets
    G03417780Courtesy of FORD MOTOR CO.