Symptom Checks
Check the following items:
- If vehicle failed an EVAP Leak Test or a Purge Flow Test only, check for damaged fuel filler cap. Visually check all EVAP lines/hoses for proper connections, damage or blockage. Check EVAP canister for damage. If no problems are indicated, go to CIRCUIT TEST HX, step 44) in appropriate article:
For SOHC vehicles, see TESTS W/CODES .
For DOHC vehicles, see TESTS W/CODES .
- Check the following Parameter Identification (PID) values: DPFEGR, ECT, IAC, LONGFT 1, LONGFT 2, VPWR and VREF. See appropriate article:
For SOHC vehicles, see PIN VOLTAGE CHARTS .
For DOHC vehicles, see PIN VOLTAGE CHARTS .
On some vehicles, all PIDs may not be applicable.
- Check engine emissions. If HC emissions are excessive, check fuel delivery system. See CIRCUIT TEST HC in appropriate article:
For SOHC vehicles, see TESTS W/CODES .
For DOHC vehicles, see TESTS W/CODES .
- If fuel delivery system is okay, check secondary ignition system. See CIRCUIT TEST JB in appropriate TESTS W/CODES article. If ignition system is okay, check PCV system. See CIRCUIT TEST HG in appropriate TESTS W/CODES article. If PCV system is okay, check engine compression. Check engine mechanical condition. Check intake manifold gasket, camshaft and valves.
- If NOx emissions are excessive, check engine mechanical condition (excessive cylinder carbon build-up). If engine mechanical condition is okay, on A/T vehicles, check transmission torque converter operation. On all vehicles, check cooling system. If cooling system is okay, check for causes for engine running lean (vacuum leaks, low fuel pressure, etc.). If no problems are found, check catalytic converter efficiency. See SYSTEM/COMPONENT TESTS article.
- If CO emissions are excessive, check secondary ignition system. See CIRCUIT TEST JB in appropriate article:
For SOHC vehicles, see TESTS W/CODES .
For DOHC vehicles, see TESTS W/CODES .
- If ignition system is okay, check fuel delivery system. See CIRCUIT TEST HC in appropriate TESTS W/CODES article. If fuel system is okay, check PCV system. See CIRCUIT TEST HG in appropriate TESTS W/CODES article. If PCV system is okay, check exhaust system for restriction. See CIRCUIT TEST HF in appropriate TESTS W/CODES article. If exhaust system is okay, check engine compression. Check engine mechanical condition. Check intake manifold gasket, camshaft and valves.