Symptom Checks
Check the following items:
- If A/C clutch does not engage, check voltage to A/C clutch. With engine running and A/C switch on, voltage should be more than 10.5 volts. If voltage is less than 10.5 volts, disconnect A/C cycling switch and install a jumper wire in switch wiring harness connector. Start engine and turn A/C on. Using scan tool, select ACCS PID. If PID value is OFF, on Escort, go to CIRCUIT TEST X, step 100) in TESTS W/CODES .
- If PID value is ON, on Escort ZX2, start engine. Using scan tool, select ACP V PID. Turn A/C on. If PID voltage is more than 4.2 volts, excessive A/C pressure is indicated. Connect A/C manifold gauges and perform A/C system function test. If PID voltage is less than 4.2 volts, go to CIRCUIT TEST X, step 110) in TESTS W/CODES .