LEMON Manuals: Even more car manuals for everyone
Home >> Mercury >> 1998 >> Sable GS, 3.0 S >> Repair and Diagnosis >> External Pages >> Different car >> Section 27 (Engine Controls - Basic Engine Testing - 3.4L) >> Ignition Checks >> EDIS (DISTRIBUTORLESS) >> Spark Check

Spark Check

WARNING: This page is about a different car, the 1998 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. Perform self diagnostic QUICK TEST to check for ignition-related fault codes, and repair as necessary. See QUICK TEST in TESTS W/CODES - 3.4L article. If no fault codes are retrieved, check ignition system wiring harness for damage or loose connectors. See WIRING DIAGRAMS - 3.4L article. Clean or repair connectors as necessary.
  2. If wiring and connectors are okay, use Neon Bulb Spark Tester (D8IP-6666-A) to check for spark at each spark plug while cranking engine. If spark is strong and consistent at each spark plug (one spark per crankshaft revolution), ignition system is okay. If spark is not present, go to CIRCUIT TEST A in TESTS W/CODES - 3.4L article.