Clutch Assembly: Inspection
- Check pressure plate surface for scoring, cracks or discoloration. Remove minor scratches or discoloration with fine emery cloth. Check diaphragm spring fingers for discoloration, scoring, broken or bent segments, and spring ends that are higher or lower. All spring ends must be the same height.
- Check clutch disc lining surface for hardening or presence of oil. Check for worn clutch disc lining. Check for loose lining rivets. Measure depth of rivet heads. Minimum allowable rivet depth is .012" (.3 mm). Check for wear or rust on splines. Rust may be removed with emery cloth.
- Check flywheel surface for marks, scoring or discoloration. Minor surface repairs may be removed with fine emery cloth. Flywheel must be machined is scoring or discoloration is excessive. Check for damaged or worn ring gear teeth.