Remove/Install Filler Neck Of Fuel Tank - Ar47.10-D-7541TS

Model 907 with engine 642, 651 

	Risk of explosion  caused by fuel igniting, risk of poisoning caused by inhaling and swallowing fuel as well as risk of injury to eyes and skin caused by contactwith fuel.	No fires, sparks, open flames or smoking. Pour fuels into suitable and appropriately marked containers only. Wear protective clothing when handling fuel.	AS47.00-Z-0001-01A
	Remove/install
1	Open and close fuel filler cap (1).	in order to relieve pressure in the fuel tank
2	Empty the fuel tank.		AR47.10-D-4001TS
3	Remove cover (2).	To do this, remove screws/bolts (3). Ensure that seal is seated correctly on the cover (2). Check seal on cover (2). Depending on the findings, ↓ Replace seal on cover (2).
4	Unscrew bolt (4).	Replace lock nut for screw (4).
Model 907 with engine 642, 651			AR47.10-D-4100TSR
6	Remove sealing (5).	Ensure that sealing (5) is seated correctly.
7	Disconnect electrical connection (6).
8	Remove filler neck (7).
9	Remove protective ring (8) from filler neck (7).	If protective ring (8) or filler neck (7) are replaced.
10	Install in the reverse order.
	Check
11	Check fuel system in the area of the filler neck (7) for leak tightness.	Remove escaping fuel. Damage will otherwise occur. Visual inspection only.