Service Campaign 2014080002 - Update Transmission Control Module Software (2014080002)
WARNING: This page is about the SLS AMG Black Series, which is a different variant/trim than selected.
Publication date: 2014-08-29Reference number: 2014080002
SERVICE CAMPAIGN 2014080002 - UPDATE TRANSMISSION CONTROL MODULE SOFTWARE
SERVICE CAMPAIGN BULLETIN
Reference Number(s): 2014080002, Date of Issue:
August 2014
| MERCEDES-BENZ: | Model 197, Model Year 2014 |
SUBJECT
Model 197, Model Year 2014
Update Transmission Control Module Software
This Service Campaign has been initiated because Daimler AG (DAG), the manufacturer of Mercedes-Benz vehicles, has determined that the transmission control module software does not correspond to current series production. To ensure proper function of the transmission an authorized Mercedes-Benz dealer will update the transmission control module software at the next workshop visit.
Prior to performing this Service Campaign:
- Please check VMI to determine if the vehicle is involved in the Campaign and if it has been previously repaired.
- Please review the entire Service Campaign bulletin and follow the repair procedure exactly as described.
Approximately 116 vehicles are affected.
PROCEDURE
NOTE:
- Use DAS/Xentry 07-08/14 with all associated patches or higher.
- Follow the steps exactly as described in DAS/Xentry.
- Connect battery charger (battery voltage >12.5V).
- Ensure all electrical consumers are switched-off.
- In the event of software/SCN update issues, contact Star Diagnosis User Help Desk. Please refer to the "pre-call" check list before contacting UHD.
- Refer to Star Diagnosis System (SDS) Best Practices Guide.
- Read out EEPROM data from the electronic transmission control module and store temporarily as .log file: To do so, select menu item "Control unit view/Type of drive/VGS fully integrated transmission control/DKG electronic transmission control for dual clutch transmission (N15/13) DCT/Adaptations/Teach-in processes/Display of EEPROM values".
- Create a PTSS case and reference this campaign number in the customer complaint field. You will not receive a response; this is for data collection purposes.
- Update electronic transmission control module software:
- Follow on-screen instructions.
"Control unit view/Type of drive/VGS fully integrated transmission control/DKG electronic transmission control for dual clutch transmission (N15/13) DCT/Adaptations/Control unit programming".
NOTE:
The following allowable labor operation should be used when submitting a warranty claim for this repair:
WARRANTY INFORMATION
Operation
- Connect/disconnect battery charger (02-5058)
- Star Diagnosis System (SDS), Connect/disconnect (02-4762)
- Update electronic transmission control module software* (02-8600)
WARRANTY INFORMATION
| Damage Code | Operation Number | Labor Time (hrs.) | ||
|---|---|---|---|---|
| 27 906 38 8 | 02-5058 | 0.1 | ||
| 02-4762 | 0.1 | |||
| 02-8600 | 0.3 | |||
|
||||
NOTE:
Operation Number labor times are subject to change.