LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2012 >> Sprinter 2500, Van Cargo Extended >> Repair and Diagnosis >> Engine Performance >> System >> Mixture Formation -- Model 906 (Engine 642) >> Testing & Repair >> Remove/Install Hot Film Mass Air Flow Sensor - Ar07.07-D-1453SD

Remove/Install Hot Film Mass Air Flow Sensor - Ar07.07-D-1453SD

ENGINE 642, 646, 651 in MODEL 906 

Fig 1: Hot Film Mass Air Flow Sensor Component Locations
G08208154Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install   
1 Remove intake hose downstream of air filter (1) from hot film MAF sensor (B2/5, B2/7, B2/12 or B2/14)  
2 Disconnect electrical connector (3) from hot film MAF sensor (B2/5, B2/7, B2/12 or B2/14)  
3 Unscrew bolts from hot film MAF sensor (B2/5, B2/7, B2/12 or B2/14)  
4 Pull hot film MAF sensor (B2/5, B2/7, B2/12 or B2/14) out of air filter housing (2). IMPORTANTInstallation:  Inspect O-ring, install new ring if necessary.
5 Install in the reverse order