LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2012 >> Sprinter 2500, Van Cargo Extended >> Repair and Diagnosis >> Engine Performance >> System >> Mixture Formation -- Model 906 (Engine 642) >> Testing & Repair >> Remove/Install Exhaust Gas Temperature Probe - Ar07.04-D-0071SG

Remove/Install Exhaust Gas Temperature Probe - Ar07.04-D-0071SG

ENGINES 642.896 in MODEL 906 

Fig 1: Exhaust Gas Temperature Probe Component Locations
G08208150Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install     
DANGER Risk of injury  to skin and eyes caused by handling hot or glowing objects. Wear safety gloves, protective clothing and safety glasses, if necessary. AS00.00-Z-0002-01A
1 Remove catalytic converter exhaust pipe (4) to exhaust gas turbocharger   AR49.10-D-5529SG
2 Remove trim panel on right cylinder head cover   AR01.20-D-5015SF
3 Remove bracket (3) from rail (1)    
4 Disconnect electrical connector (2)    
5 Expose electrical line (5)    
6 Unscrew exhaust temperature sensor (B16/11) from exhaust gas turbocharger (6) IMPORTANTInstallation:  When tightening exhaust temperature sensor (B16/11) ensure that electrical line (5) is routed correctly. The heat protection hose (arrow) must be located in the area of the exhaust gas turbocharger (6).
TORQUE SPECIFICATION
*BA07.04-N-1011-01G 
7 Install in the reverse order    
DANGER Risk of accident  caused by vehicle starting off by itself when engine is running. Risk of injury  caused by contusions and burns during starting procedure or when working near the engine as it is running Secure vehicle to prevent it from moving by itself.
Wear closed and snug-fitting work clothes.
Do not touch hot or rotating parts.
AS00.00-Z-0005-01A
8 Test run engine and check exhaust system for leaks around turbocharger (6)
EXHAUST GAS TEMPERATURE PROBE TORQUE SPECIFICATIONS - ENGINE 642.896

Number Designation Engine 642.896
BA07.04-N-1011-01G Exhaust temperature sensor to exhaust gas turbocharger Nm 45