LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2011 >> ML63 >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seats, Restraint Systems - 164 Chassis >> Testing & Repair >> Remove/install driver kneebag - AR91.60-P-0200GZ

Remove/install driver kneebag - AR91.60-P-0200GZ

Fig 1: Identifying Driver Kneebag
G00544219Courtesy of MERCEDES-BENZ OF NORTH AMERICA.
  Remove/install    
Danger! Risk of injury caused by performing testing or repair work on airbag or emergency tensioning retractor units. Store airbag units with deployment side facing up; do not expose to temperatures greater than 100 °C. When working on these units, disconnect the power supply. AS91.00-Z-0001-01A 
  Notes on performing repair, body work and welding on vehicles with airbags and ETR units   AH91.00-P-0002-01M 
  Legal requirements on handling and storing airbags and emergency tensioning retractor units   AH91.00-P-0004-01A 
  Assessment of airbag and belt tensioner units in accident vehicles   AH91.00-P-0006-01B 
1 Disconnect battery ground line   AR54.10-P-0003GZ
2 Remove cover beneath dashboard (left)   AR68.10-P-1500GZ
3 Disconnect electrical connector from driver kneebag squib (R12/25)    
4 Remove bolt (1)   *BA91.60-P-1016-01H 
5 Remove bottom section of dashboard on driver's side   AR68.10-P-1505GZ
6 Remove expansion rivets (2)    
7 Remove bolster (3)    
8 Remove nuts (4)   *BA91.60-P-1015-01H 
9 Install in the reverse order    
KNEE AIRBAG TIGHTENING TORQUE

Number Designation Model 164.1/8
BA91.60-P-1015-01H Nut, knee airbag to instrument panel at bottom 4 Nm
BA91.60-P-1016-01H Screw, knee airbag to instrument panel at bottom 3 Nm