LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2006 >> R500 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Mixture Formation -- R500 >> Testing & Repair >> Remove/install injection system control unit - AR07.08-P-7008RTS

Remove/install injection system control unit - AR07.08-P-7008RTS

ENGINE 156 in MODEL 251 

Fig 1: Identifying Injection System Control Unit Remove/Install Components
G00524585Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install
NOTES Notes on avoiding damage to electronic components due to electrostatic discharge All models AH54.00-P-0001-01A
DANGER Risk of injury  caused by fingers being pinched or crushed  when removing, installing or aligning hoods, doors, trunk lids, tailgates or sliding roof. AS00.00-Z-0011-01A
1 Open engine hood AR88.40-P-1000RT
2 Read out coding of ME-SFI [ME] control unit (N3/10) IMPORTANT only when replacing ME-SFI [ME] control unit (N3/10) and if it can still be read out using STAR DIAGNOSIS AD00.00-P-2000-04A
REFER TO SELF-DIAGNOSTIC SYSTEMS Connect STAR DIAGNOSIS and read out fault memory STAR DIAGNOSIS diagnostic system *WH58.30-Z-1048-13A 
DANGER Risk of explosion  caused by oxyhydrogen gas.Risk of poisoning and caustic burns  caused by swallowing battery acid.Risk of injury  caused by burns to skin and eyes from battery acid or when handling damage lead-acid batteries. No fire, spark, open flames or smoking. Wear acid resistant gloves, clothing and glasses. Only pour battery acid into suitable and appropriately marked containers AS54.10-Z-0001-01A
3 Disconnect battery ground cables AR54.10-P-0003RT
4 Unclip cover (1) IMPORTANT Do not damage retaining lug at the cover
5 Disconnect electrical connector (2, 3) at ME-SFI [ME] control unit (N3/10) IMPORTANTRemoval:  to disconnect electrical connectors at ME-SFI [ME] control unit (N3/10), pull locks outwards.
IMPORTANTInstallation:  Check that the wiring harness gasket is at the correct position.
6 Release retaining lugs (4) and remove CDI control unit (N3/9) from retaining frame (5). IMPORTANTInstallation:  Ensure correct seating in retaining frame.
7 Install in the reverse order
8 Encode ME-SFI [ME] control unit (N3/10) IMPORTANT Only when installing a new ME-SFI [ME] control unit (N3/10) AD00.00-P-2000-04A
REFER TO SELF-DIAGNOSTIC SYSTEMS Connect STAR DIAGNOSIS and read out fault memory STAR DIAGNOSIS diagnostic system *WH58.30-Z-1048-13A 
9 Perform basic programming AR00.19-P-0200RT
COMMERCIALLY AVAILABLE TOOLS

Number Designation  
WH58.30-Z-1048-13A
 
STAR DIAGNOSIS diagnostic system, Compact passenger car 6511 1801 00