LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2006 >> R500 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Mixture Formation -- R500 >> Testing & Repair >> Remove/install injection system control unit - AR07.08-P-7008RT

Remove/install injection system control unit - AR07.08-P-7008RT

ENGINE 113.971 in MODEL 251.075/175 

Fig 1: Identifying ME Control Unit, Damping Material And Nuts
G07302005Courtesy of MERCEDES-BENZ USA
REMOVINGINSTALLING Remove/install    
NOTES Notes on avoiding damage to electronic components due to electrostatic discharge All models AH54.00-P-0001-01A
1.1 Read out the coding of the ME-SFI [ME] control unit (N3/10) IMPORTANT Only when exchanging the ME-SFI [ME] control unit and if it can still be read out with STAR DIAGNOSIS.  
REFER TO SELF-DIAGNOSTIC SYSTEMS Connect STAR DIAGNOSIS and read out fault memory   AD00.00-P-2000-04A
    STAR DIAGNOSIS diagnostic system *WH58.30-Z-1048-13A
2 Remove right front floor covering   AR68.20-P-2070RT
3 Remove vapor barrier (1)    
4 Unscrew nuts (2) and remove the bracket along with the ME-SFI [ME] control unit (N3/10)    
5 Separate the electrical connectors from the ME control unit (N3/10)    
6 Pull out the ME-SFI [ME] control unit (N3/10) from the bracket    
7 Install in the reverse order    
8.1 Code ME control unit (N3/10) IMPORTANT Only when installing a new ME-SFI [ME] control unit (N3/10).  
COMMERCIALLY AVAILABLE TOOLS

Number Designation
WH58.30-Z-1048-13A STAR DIAGNOSIS diagnostic system, Compact Passenger Car 6511 1801 00