ME-SFI part load/full load operation - function - GF07.61-P-3016BK
ENGINE 113.967 in MODEL 219
ENGINE 113.964 in MODEL 164.1 up to Model Year 8
ENGINE 113.971 in MODEL 251 up to Model Year 8
The particular quantity of fuel is metered to the engine in line with the performance map. The fuel quantity depends on:
- Coolant temperature
- Intake air temperature (only in warming-up phase)
- Engine speed
- Engine load
- Closed-loop mixture control
- Intake manifold length
- Ignition angle.
Part load operation: When the engine is at operating temperature optimal emission levels and good fuel consumption are assured in combination with the lambda control.
Full load operation: Maximum engine torque is produced at a pedal value of > 90%. The injection time is extended accordingly for this purpose.
| Component description for the engine electronics control unit | GF07.61-P-6000BK | ||
| Component description for the crankshaft position sensor | GF07.04-P-6010BK | ||
| Component description for the camshaft Hall sensor | GF07.04-P-6020BK | ||
| Component description for the hot film MAF sensor | GF07.07-P-6000BK | ||
| Component description for the knock sensor | GF07.04-P-6030BK | ||
| Component description for the coolant temperature sensor | GF07.04-P-6040BK | ||
| Component description for the variable intake manifold switchover valve | GF09.20-P-6001BK | ||
| Component description for the fuel injection valves | GF07.03-P-6010BK |