LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2006 >> R500 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Mixture Formation -- R500 >> Basic Knowledge >> ME-SFI maximum engine speed limitation, function - GF07.61-P-3007AMG

ME-SFI maximum engine speed limitation, function - GF07.61-P-3007AMG

ENGINE 156.980 in MODEL 164, 251 

ENGINE 156.982 in MODEL 209 

ENGINE 156.983 in MODEL 211, 219 

ENGINE 156.984 in MODEL 216, 221 

Fig 1: ME-SFI Maximum Engine Speed Limitation Function Diagram
G04958361Courtesy of MERCEDES-BENZ USA

The ME-SFI [ME] control unit detects the engine speed via the crankshaft Hall sensor signal. The engine speed is limited to protect the engine and the drive train through:

  1. Torque converter protection at selector lever position P/N 

    In order to protect the torque converter in selector lever positions P or N (no power flow) from excessive static internal pressure, the maximum engine speed is limited to approx. 4200 RPM.

  2. Driving mode 

    In order to protect the engine from the consequences of impermissibly high engine speeds, the maximum engine speed is limited in 2nd to 7th gear for about 10 seconds to about 7200 RPM and thereafter to 7000 RPM.

    In 1st gear the maximum engine speed is limited to about 6700 RPM.

    The driving mode is detected from the speed signal by the ESP control unit.

  3. Throttle valve actuator defective 

In the case of a defective throttle valve actuator, the maximum engine speed is limited through cutting out the fuel injection valves at about 1400 RPM.

  Component description for the fuel injection valves Y62y1-Y62y8 GF07.03-P-6010AMG 
  Component description for the crankshaft Hall sensor B70 GF07.04-P-6220AMG 
  Component description for the ME-SFI [ME] control unit N3/10 GF07.61-P-6000AMG 
  Component description for ignition coils T1/1-T1/8 GF15.10-P-2100AMG
  Component description for the throttle valve actuator M16/3, M16/4 GF30.20-P-2020AMG