LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2006 >> R500 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Mixture Formation -- R500 >> Basic Knowledge >> ME engine speed signal - function - GF07.61-P-3017BK

ME engine speed signal - function - GF07.61-P-3017BK

ENGINE 113.967 in MODEL 219 

ENGINE 113.964 in MODEL 164.1 up to Model Year 8 

ENGINE 113.971 in MODEL 251 up to Model Year 8 

Signal assignment 

Fig 1: ME Engine Speed Signal Assignment
G07302060Courtesy of MERCEDES-BENZ USA

The short-circuit proof engine speed signal "TNA" is generated from the signals from the crankshaft Hall sensor in the ME control unit. The output stage output can accept a maximum load of 20 mA.

The signal is picked up at the data link connector. In addition, the control unit outputs a CAN message with the engine speed to further control units and to the instrument cluster.

The engine speed signal "TNA" is a square wave signal with a constant duty cycle. 6 pulses are output per engine revolution. If the signal from the crankshaft Hall sensor fails, then the signals of the camshaft Hall sensor are used as a replacement.

IMPORTANT The crankshaft Hall sensor signal is "LOW" in ignition TDC on the 1st cylinder.

  Component description for the engine electronics control unit   GF07.61-P-6000BK 
  Component description for the crankshaft position sensor   GF07.04-P-6010BK 
  Component description for the camshaft Hall sensor   GF07.04-P-6020BK