LEMON Manuals: Even more car manuals for everyone
Home >> Mercedes Benz >> 2006 >> R500 >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Mixture Formation -- R500 >> Basic Knowledge >> Component description for the knock sensor - GF07.04-P-6030BK

Component description for the knock sensor - GF07.04-P-6030BK

ENGINE 113.967 in MODEL 219 

ENGINE 113.964 in MODEL 164.1 up to Model Year 8 

ENGINE 113.971 in MODEL 251 up to Model Year 8 

Fig 1: Identifying Right Knock Sensor 1 And Left Knock Sensor 2
G07302013Courtesy of MERCEDES-BENZ USA
Fig 2: Locating Knock Sensors
G07302014Courtesy of MERCEDES-BENZ USA

Location 

The knock sensors are located at the top of the crankcase below the intake manifold.

Knock sensor signal 

Fig 3: Knock Sensor Signal Patterns
G07302015Courtesy of MERCEDES-BENZ USA

Task 

Detects combustion knocks at excessive vibrations at the crankcase. Anti-knock control thus corrects the ignition timing for each individual cylinder when the engine is warmed up.

Design 

The knock sensors work according to the piezo ceramic principle. The screened cables are connected directly to the knock sensors.

Function 

Any vibrations which occur are converted with the aid of the piezo ceramic into electrical signals.

The noise signal is modulated to a DC voltage from 0.13 V to 4.7 V for transmission to the ME control unit.

Piezoelectric effect: If a mechanical force acts on a crystal, electrical voltages are produced.

IMPORTANT Knock sensor signals can also indicate engine damage (e.g. increased engine noise due to widened piston grooves).