Test 9
Test ground connection from ground point to electronic
control unit terminal 20.
- Push Yellow light button. If Green lamp light and digital readout on TEST 7 is between 110-300 mV and between 40-250mV, system is okay. Go to TEST 10.
- For TEST 7 if digital readout is below 110 mV or higher than 300 mV, go to step 3). For TESTS 8 and 9 if digital readout is below 40mV or higher than 250 mV go to step 3).
- Check electrical harness from grounding point to electronic control unit terminal 10, 34 and 20 for poor contact or interruption. Check ground terminal on overvoltage protection relay for poor contact or interruption. Repair as necessary.