LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2024 >> 3 S >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belts >> Rear Center Seat Belt Removal/Installation >> 4SD >> Notes

Rear Center Seat Belt Removal/Installation: 4SD: Notes

CAUTION:
  • If the retractor is disassembled, it will not operate correctly due to looseness and excessive play of the internal parts, therefore, do not disassemble the retractor.
  1. Switch the ignition off.
  2. Disconnect the negative battery terminal and wait for 1 min or more. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  3. Remove the following parts:
    1. Rear scuff plate (See REAR SCUFF PLATE REMOVAL/INSTALLATION .)
    2. C-pillar trim (See C-PILLAR TRIM REMOVAL/INSTALLATION .)
    3. Rear seat cushion (See REAR SEAT CUSHION REMOVAL/INSTALLATION .)
    4. Rear seat back (See REAR SEAT BACK REMOVAL/INSTALLATION .)
    5. Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION .)
    6. Rear package trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION .)
    7. Rear buckle (LH) (See REAR BUCKLE REMOVAL/INSTALLATION .)
  4. Remove the bolt.
    Fig 1: Rear Center Seat Belt Retractor Bolt With Torque Specifications
    G13177801Courtesy of MAZDA MOTORS CORP.
  5. Remove the rear center seat belt retractor.
  6. Remove the rear center seat belt.
  7. Install in the reverse order of removal. (See REAR CENTER SEAT BELT INSTALLATION NOTE .)