LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2023 >> MX-5 Miata Club >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Electric Power Steering System (Service Information) >> Tie-Rod End Inspection

Tie-Rod End Inspection

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the front under cover. (See FRONT UNDER COVER REMOVAL/INSTALLATION .)
  3. Disconnect the intermediate shaft from the steering gear and linkage. (See INTERMEDIATE SHAFT REMOVAL/INSTALLATION .)
  4. Remove the steering gear and linkage. (See STEERING GEAR AND LINKAGE REMOVAL/INSTALLATION .)
  5. Remove the tie-rod end from the steering gear and linkage. (See STEERING GEAR AND LINKAGE DISASSEMBLY .)
  6. Inspect the tie-rod end for damage and the boot of the tie-rod end for cracks.
    G14589673Courtesy of MAZDA MOTORS CORP.
  7. Inspect the tie-rod end for excessive play.
  8. Rotate the tie-rod end 5 times.
  9. Install 2 nuts to the tie-rod end and measure the rotational torque of the tie-rod end using a torque wrench.
    G14589674Courtesy of MAZDA MOTORS CORP.

    Tie-rod end rotational torque 

    0.5-3.0 N.m {5.1-30 kgf.cm, 4.5-26 in.lbf}