LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2023 >> CX-50 S Select >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Rear Console Removal/Installation

Rear Console Removal/Installation

  1. Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION .)
  2. Remove the following parts:
    1. Select lever knob (See SELECTOR LEVER COMPONENT REMOVAL/INSTALLATION .)
    2. Console side panel (See CONSOLE SIDE PANEL REMOVAL/INSTALLATION .)
    3. Shift panel (See SHIFT PANEL REMOVAL/INSTALLATION .)
    4. Front console upper panel (See FRONT CONSOLE UPPER PANEL REMOVAL/INSTALLATION .)
    5. Front console box (See FRONT CONSOLE BOX REMOVAL/INSTALLATION .)
    6. Upper panel (without wireless charger (Qi)) (See UPPER PANEL REMOVAL/INSTALLATION .)
    7. Wireless charger (Qi) (with wireless charger (Qi)) (See WIRELESS CHARGER (Qi) REMOVAL/INSTALLATION .)
    8. Console-up (See CONSOLE-UP REMOVAL/INSTALLATION .)
  3. Move the console panel in the order of arrows (1), (2), (3), and (4) shown in the figure below and remove the clips and guides.
    G15743241Courtesy of MAZDA MOTORS CORP.
  4. Disconnect the connectors and remove the wiring harness clip. (with rear seat warmer system, with USB port)
    G15743242Courtesy of MAZDA MOTORS CORP.
  5. Remove the rear vent duct No. 3. (with rear vent duct) (See REAR VENT DUCT REMOVAL/INSTALLATION .)
  6. Open the console lid.
  7. Remove the cushion.
    G15743243Courtesy of MAZDA MOTORS CORP.
  8. Remove the bolts.
    Fig 1: Rear Console And Bolts With Torque Specifications
    G15743244Courtesy of MAZDA MOTORS CORP.
  9. Move the rear console in the direction of the arrow shown in the figure below, detach the clips and guides from the center lower panel, and remove the rear console.
    G15743245Courtesy of MAZDA MOTORS CORP.
  10. Remove the rear console.
  11. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals