Backup Power Supply Bracket Removal/Installation
- Disconnect the negative battery terminal. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION ).
- Remove the following parts:
- Trunk board (See TRUNK BOARD REMOVAL/INSTALLATION ).
- Bass-box (with Bose ®) (See BASS-BOX REMOVAL/INSTALLATION ).
- Sub-trunk (See SUB-TRUNK REMOVAL/INSTALLATION ).
- Trunk end trim (See TRUNK END TRIM REMOVAL/INSTALLATION ).
- Rear scuff plate (LH) (See REAR SCUFF PLATE REMOVAL/INSTALLATION ).
- Trunk side trim (LH) (See TRUNK SIDE TRIM REMOVAL/INSTALLATION ).
- C-pillar trim (LH) (See C-PILLAR TRIM REMOVAL/INSTALLATION ).
- Rear seat belt retractor (LH) (See REAR SEAT BELT REMOVAL/INSTALLATION ).
- Backup power supply (See BACKUP POWER SUPPLY REMOVAL/INSTALLATION ).
- Remove the bolts.
- Pull the backup power supply bracket in the direction of the arrow shown in the figure and detach the clip from the body.
- Remove the backup power supply bracket.
- Install in the reverse order of removal.