LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> 3 Select, 4D Hatchback >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belts >> Rear Buckle Removal/Installation >> Rear buckle (LH) >> Notes

Rear buckle (LH): Notes

  1. Switch the ignition off.
  2. Disconnect the negative battery terminal and wait for 1 min or more. (See NEGATIVE BATTERY TERMINAL DISCONNECTION/CONNECTION [(US)] .)
  3. Remove the rear seat cushion. (See REAR SEAT CUSHION REMOVAL/INSTALLATION .)
  4. Disconnect the connector.
    Fig 1: Rear Buckle (LH), Connector And Bolts With Torque Specification
    G14582607Courtesy of MAZDA MOTORS CORP.
  5. Remove the bolt.
  6. Remove the rear buckle (LH).
  7. Install in the reverse order of removal. (See Rear buckle installation note .)