LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2022 >> 3 Base >> Repair and Diagnosis >> Electrical >> Starter >> M Hybrid System >> DC-DC CONVERTER (Mazda M Hybrid) REMOVAL/INSTALLATION >> Notes

DC-DC CONVERTER (Mazda M Hybrid) REMOVAL/INSTALLATION: Notes

  1. Verify if the ground plate needs to be disconnected and if it does, disconnect it. (See GROUND PLATE DISCONNECTION/CONNECTION .)
  2. Remove the front deflector. (See DEFLECTOR REMOVAL/INSTALLATION .)
  3. Set the front mudguard (LH) aside as shown in the figure. (See MUDGUARD REMOVAL/INSTALLATION .)
    G14584678Courtesy of MAZDA MOTORS CORP.
  4. Disconnect the wiring harness shown in the figure.
    Fig 1: Wiring Harness And Nut With Torque Specification
    G14584679Courtesy of MAZDA MOTORS CORP.
  5. Disconnect the wiring harness shown in the figure.
    Fig 2: Wiring Harness And Nut With Torque Specification
    G14584680Courtesy of MAZDA MOTORS CORP.
  6. Disconnect the wiring harness shown in the figure. (with seat warmer system)
    Fig 3: Wiring Harness And Nut With Torque Specification (With Seat Warmer System)
    G14584681Courtesy of MAZDA MOTORS CORP.
  7. Remove in the order shown in the figure.
  8. Install in the reverse order of removal.
    Fig 4: DC-DC Converter Components With Torque Specification (Mazda M Hybrid)
    G14584682Courtesy of MAZDA MOTORS CORP.
    PART DESCRIPTION

    Component no. Refer to
    1 Connector
    2 Wiring harness clip
    3 DC-DC converter (Mazda M Hybrid) component (See DC-DC Converter (Mazda M Hybrid) Component Installation Note .)
    4 Bus bar No. 1
    5 Bus bar No. 2 (See Bus Bar No. 2 Installation Note .)
    6 Cover
    7 Fuse box (with seat warmer system)
    8 Bracket No. 1
    9 Bracket No. 2
    (See Bracket No. 2 Installation Note .)
    10 Bracket No. 3
    11 DC-DC converter (Mazda M Hybrid)