Air Intake Actuator Inspection (Auto A/C)
WARNING: This page is about a different car, the 2016 Mazda CX-3. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the glove compartment. (See GLOVE COMPARTMENT REMOVAL/INSTALLATION
.)
Disconnect the negative battery cable. (See NEGATIVE BATTERY CABLE DISCONNECTION/CONNECTION .)
- Remove the air intake actuator. (See AIR INTAKE ACTUATOR REMOVAL/INSTALLATION (AUTO A/C) .)
- Apply battery positive voltage and connect the ground to the air intake actuator terminals as indicated in the chart below and verify the operation condition.
| B+ Terminal | Ground Terminal | Operation |
|---|---|---|
| A | F | FRESH → RECIRCULATE |
| F | A | RECIRCULATE → FRESH |
- If not as indicated in the figure, replace the air intake actuator. (See AIR INTAKE ACTUATOR REMOVAL/INSTALLATION (AUTO A/C) .)