LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2014 >> MX-5 Miata Club, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Crankshaft Position (CKP) Sensor Inspection >> Air Gap Inspection

Air Gap Inspection

  1. Verify that the CKP sensor is securely installed.
  2. Using a thickness gauge, measure the air gap between the plate projections at the back of crankshaft pulley and the CKP sensor.
    • If not within the specification, inspect the plate projections for cracks or bending.
      • If there is any malfunction, replace the crankshaft pulley. (See ENGINE REMOVAL/INSTALLATION ).
      • If the monitor item condition/specification (reference) is not within the specification, even though there is no malfunction, carry out the "Circuit Open/Short Inspection ".
        Fig 1: Measuring Air Gap Between Plate Projections At Back Of Crankshaft Pulley And CKP Sensor Using Thickness Gauge
        G06151103Courtesy of MAZDA MOTORS CORP.

      Air gap 

      0.5-1.5 mm {0.02-0.05 in}