LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> Tribute i Touring, FWD >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Spark Plugs Removal/Installation - 3.0L

Spark Plugs Removal/Installation - 3.0L

  1. Remove the ignition coils. See IGNITION COIL-ON-PLUG REMOVAL/INSTALLATION - 3.0L  .
    CAUTION:
    • Only use hand tools when removing or installing the spark plugs, or damage can occur to the cylinder head or spark plug. 
    NOTE:
    • Use compressed air to remove any foreign material in the spark plug well prior to removing the spark plugs.
  2. Remove the spark plugs.
    • Tighten to 15 N.m {1.5 kgf.m, 133 in.lbf}.
  3. Inspect the spark plugs. See SPARK PLUG - INSPECTION  .
  4. To install, reverse the removal procedure.
    • Adjust the gap as necessary.
      Fig 1: Identifying Spark Plug Gap With Specifications
      G06767328Courtesy of MAZDA MOTORS CORP.