Spark Plugs Removal/Installation - 2.5L
- Remove the ignition coils. See IGNITION COIL ON PLUG REMOVAL/INSTALLATION - 2.5L
.
CAUTION:
- Only use hand tools when removing or Installing the spark plugs, or damage can occur to the cylinder head or spark plug.
NOTE:
- Use compressed air to remove any foreign material in the spark plug well before removing the spark plugs.
- Remove the spark plugs.
- Tighten to 12 N.m {1.2 kgf.m, 106 in.lbf}.
- Inspect spark plugs. See SPARK PLUG - INSPECTION
.
- To install, reverse the removal procedure.
- Adjust the spark plug gap as necessary.
Courtesy of MAZDA MOTORS CORP.