LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> Tribute i Touring, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Cylinder Head Temperature (CHT) Sensor Removal/Installation - 3.0L

Cylinder Head Temperature (CHT) Sensor Removal/Installation - 3.0L

Fig 1: Cylinder Head Temperature (CHT) Sensor Replacement Components With Torque Specifications (3.0L)
G07434996Courtesy of MAZDA MOTORS CORP.
  1. Disconnect the Cylinder Head Temperature (CHT) sensor electrical connector.
    NOTE:
    • If the cylinder head is being replaced, the CHT must be replaced.
  2. Remove the CHT sensor.
    • To install, tighten to 11 N.m {1.1 kgf.m, 97 in.lbf}.
  3. To install, reverse the removal procedure.