LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> Tribute i Touring, FWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Crankshaft Position (CKP) Sensor Removal/Installation - 3.0L >> Removal

Crankshaft Position (CKP) Sensor Removal/Installation - 3.0L: Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. See LIFTING .
  2. Disconnect the Crankshaft Position (CKP) sensor electrical connector.
  3. Remove the bolt and the CKP sensor.
    • To install, tighten to 10 N.m {1.0 kgf.m, 89 in.lbf}.
  4. To install, reverse the removal procedure.