Multifunction Switch
The multifunction switch controls the various components (high beam headlamps, flash-to-pass, turn signal and windshield wiper) by grounding certain SJB circuits and wiper motor circuits. When the SJB detects the specific ground, it sends a voltage to the appropriate component to activate it. The SJB controls the high beam headlamps, the flash-to-pass and the turn signals. The high beam headlamp and the turn signal portion are normally open switches that close when activated. The flash-to-pass switch is a momentary contact switch that grounds the SJB high beam headlamp circuit. The windshield wipe and wash functions are controlled directly by the multifunction switch, wiper and washer motor.