LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> Tribute i Touring, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Speed Control DEACTIVATOR Switch Removal/Installation

Speed Control DEACTIVATOR Switch Removal/Installation

Fig 1: Identifying Speed Control Deactivator Switch And Electrical Connector
G07436133Courtesy of MAZDA MOTORS CORP.
  1. Disconnect the electrical connector.
  2. Rotate the speed control deactivator switch counterclockwise one-quarter turn from the bracket.
  3. To install, reverse the removal procedure.
    NOTE:
    • When installing the speed control deactivator switch, it is automatically self-adjusting to the correct position. Do not pull up or push down on the pedal during installation. Make sure that the speed control deactivator switch is correctly seated in the brake pedal bracket.