LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 2 Touring, 1.5 Z, Standard >> Repair and Diagnosis >> Transmission >> Manual Transaxle Clutch [F35M-R] >> Clutch Unit Removal/Installation >> Flywheel Removal Note

Flywheel Removal Note

  1. Hold the flywheel using the SST  .
  2. Remove the lock bolts evenly and gradually in a crisscross pattern.
  3. Remove the flywheel.
  4. Inspect for oil leakage from the crankshaft rear oil seal.
Fig 1: Holding Flywheel Using Special Service Tool
G06941159Courtesy of MAZDA MOTORS CORP.