LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2011 >> 2 Touring, 1.5 Z, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle (Service, Removal & Installation F35M-R) >> Manual Transaxle Removal/Installation >> No. 1 Engine Mount Installation Note

No. 1 Engine Mount Installation Note

CAUTION:
  • Align the transaxle bolt holes and the engine mount exactly. Any misalignment can result in bolts and bolt holes becoming damaged or stripped during installation.
  1. Adjust the SST  (engine support), and align the hole of the No. 1 engine mount with the bolt hole of transaxle.
  2. Tighten the bolts in the order of A to C

    Tightening torque 

    A, B: 54-61 N.m {5.5-6.2 kgf.m, 40-44 ft.lbf} 

    C: 43-55 N.m {4.4-5.6 kgf.m, 32-40 ft.lbf} 

Fig 1: Identifying No. 1 Engine Mount Bolts In Tightening Sequence
G06941198Courtesy of MAZDA MOTORS CORP.